Linux Virtual Server
Published on Nov 21, 2015
With the explosive growth of the Internet and its increasingly important role in our daily lives, traffic on the Internet is increasing dramatically, more than doubling every year. However, as demand and traffic increases, more and more sites are challenged to keep up, literally, particularly during peak periods of activity. Downtime or even delays can be disastrous, forcing customers and profits to go elsewhere.
The solution? Redundancy, redundancy, and redundancy. Use hardware and software to build highly-available and highly-scalable network services.
Started in 1998, the Linux Virtual Server (LVS) project combines multiple physical servers into one virtual server, eliminating single points of failure (SPOF). Built with off-the-shelf components, LVS is already in use in some of the highest-trafficked sites on the Web. As more and more companies move their mission-critical applications onto the Internet, the demand for always-on services is growing. So too is the need for highly-available and highly-scalable network services. Yet the requirements for always-on service are quite onerous:
" The service must scale: when the service workload increases, the system must scale up to meet the requirements.
" The service must always be on and available, despite transient partial hardware and software failures.
" The system must be cost-effective: the whole system must be economical to build and expand.
" Although the whole system may be big in physical size, it should be easy to manage.
Clusters of servers, interconnected by a fast network, are emerging as a viable architecture for building a high-performance and highly-available service. This type of loosely-coupled architecture is more scalable, more cost-effective, and more reliable than a single processor system or a tightly-coupled multiprocessor system. However, there are challenges, including transparency and efficiency.
The Linux Virtual Server(LVS) is one solution that meets the requirements and challenges of providing an always-on service. In LVS, a cluster of Linux servers appear as a single (virtual) server on a single IP address. Client applications interact with the cluster as if it were a single, high-performance, and highly-available server. Inside the virtual server, LVS directs incoming network connections to the different servers according to scheduling algorithms.
Scalability is achieved by transparently adding or removing nodes in the cluster. High availability is provided by detecting node or daemon failures and reconfiguring the system accordingly, on-the-fly.
LINUX VIRTUAL SERVER ARCHITECTURE
The three-tier architecture consists of:
" A load balancer, which serves as the front-end of the whole cluster system. It distributes requests from clients among a set of servers, and monitors the backend servers and the other, backup load balancer.
" A set of servers, running actual network services, such as Web, email, FTP and DNS.
" Shared storage, providing a shared storage space for the servers, making it easy for the servers to have the same content and provide consistent services.
" The load balancer, servers, and shared storage are usually connected by a high-speed network, such as 100 Mbps Ethernet or Gigabit Ethernet, so that the intranetwork does not become a bottleneck of the system as the cluster grows.
More Seminar Topics:
Next Generation Secure Computing Base,
On-line Analytical Processing (OLAP),
Parallel Virtual Machine,
Pivot Vector Space Approach in Audio-Video Mixing,
Real Time Application Interface,
Remote Administration Trojan's,
Scientific Archive Management System (SAM),
Self Defending Networks,
Self Organizing Maps,